FM High Quality High-precision Spherical Plain Bearings GE55 SX

Plain radial bearing

(1) GE... E-type: single outer ring, without lubricating oil groove. Capable of withstanding radial loads and smaller axial loads in any direction.

(2) GE... ES type: single seam outer ring with lubricating oil groove. Capable of withstanding radial loads and smaller axial loads in any direction.

(3) GE... ES-2RS type, GEEW... ES-2RS type: single seam outer ring, with lubricating oil groove, with sealing rings on both sides. Capable of withstanding radial loads and smaller axial loads in any direction.

(4) GE... ESN type: single seam outer ring, GE... XSN type: double seam outer ring (split outer ring), with lubricating oil groove, and outer ring with stop groove. Capable of withstanding radial loads and smaller axial loads in any direction. But when the axial load is borne by the stop ring, its ability to withstand the axial load decreases.

(5) GE... HS type: The inner ring has a lubricating oil groove, and the double half outer ring can adjust the clearance after wear. Capable of withstanding radial loads and smaller axial loads in any direction.

(6) GE... DE1 type: The inner ring is made of quenched bearing steel, and the outer ring is made of bearing steel. During the assembly of the inner ring, it is extruded into shape and has lubricating oil grooves and holes. Bearings with an inner diameter less than 15mm, without lubricating oil grooves and holes. Capable of withstanding radial loads and smaller axial loads in any direction.

(7) GE... DEM1 type: The inner ring is made of hardened bearing steel, and the outer ring is made of bearing steel. During the assembly of the inner ring, it is extruded into shape. After the bearing is installed in the bearing seat, the end groove is pressed out on the outer ring to fix the bearing axially. Capable of withstanding radial loads and smaller axial loads in any direction.

(8) GE... DS type: The outer ring has assembly grooves and lubrication grooves. Limited to large-sized bearings only. Capable of withstanding radial loads and smaller axial loads in any direction (one side of the assembly groove cannot withstand axial loads).