FM27 Henkle Loctiter Pc7350 400ml Curing Polyurethane Quick On-site Repairs for Conveyor Belts Repairs

LOCTITE®PC7350isa100%solid,roomtemperaturecuring 2kpolyurethanecompoundwhichcures toa tough, resilient adhesive. This product is an adhesive, sealant, and repair compoundthatoffersanexcellentbalanceofself-levelingand fast cure. Thismakes this product an excellent choice for on-siterepairs,suchasconveyorbeltsandother rubberparts. Typicalapplicationsincluded,butarenot limitedto,repairingor rebuilding liners in mills, pumps, feeder bowls, hoppers, chutes,andrepairingcasturethanescreensandliners. 

 TYPICALPROPERTIESOFUNCUREDMATERIAL PartA: 

 SpecificGravity,g/cm³ 1.14 

 Viscosity,Brookfield -RV, 25°C,mPa·s(cP): 

 Spindle6,speed20rpm 10,000 to30,000 

 PartB: SpecificGravity,g/cm³ 1.05 

 Viscosity,Brookfield -RVDV, 25°C,mPa·s(cP): 

 Spindle4,speed20rpm 3,000 to8,000

Application Method: 

 1. Apply the urethane onto the substrate and work in with plastic spatula to allow maximum surface contact and adhesion. 

 2. Cartridges: It is not necessary to use all the urethane in the cartridge in one application. Leave the static mixer on the cartridge when the application is complete. The mixer serves as a seal and should be discarded and replace with fresh mixer for the next application. 

 NOTE: LOCTITE® PC 7350 cures very quickly at high temperatures, reducing adequate working time and possibly causing premature curing.