SL29 Accelerated Curing Agent Loctiter 770 SF7649 Accelerant Surface Treatment Agent Instant Drying Adhesive

Loctite 7649 promoter is a single component solvent based surfactant that does not contain CFC.

This activator is mainly used to improve the curing speed of all Loctite anaerobic adhesives. Especially suitable for dull metals, inert surfaces, or situations with large adhesive cracks. Activator 7649 can still be used when the curing temperature is below room temperature, especially recommended for use below 15 ℃. The characteristic is that it has a long service life on the parts. Used to promote the curing speed of all Loctite anaerobic adhesives, especially to ensure normal curing on non active metal surfaces.

Purpose: To promote the curing of anaerobic adhesive and structural adhesive

Color: Transparent, green

Viscosity (MPa. s): 2

Solvent: acetone

Operation time:<30 days

Solvent evaporation time: 30/70 seconds

Packaging specification: 1 gallon/barrel

Product Introduction:

Usage: 1. Activate non active surfaces;

2. Accelerate the curing speed to quickly restore the fasteners to use;

3. In larger gaps and deeper threads, the curing speed is accelerated;

4. Greatly improve the curing speed on cold parts;

5. Can be used as a cleaning agent.

Can be selectively applied to the surfaces of the following materials:

Active surfaces: copper surface, bronze surface, iron surface, soft steel surface

Must be applied to the following material surfaces:

Non active surfaces: aluminum surface, stainless steel surface, magnesium surface, zinc surface, black oxide surface, cadmium surface, titanium surface, and others.