Portable Induction Bearing Heater with High Quality

Our Services:

* 24 hours online service;
* One year warranty, repair and service for the whole life;
* Question report will be replied in 48 hours;
* Quality guaranteed.
Packaging:
* All products will be packed with wooden case.
Shipping:
* Small quantity: by international exress, such as DHL, TNT, FEDEX, UPS, etc. depending on the customers' choice. Goods will arrive within 7 days in normal cicumstances;
* Large quantity: by sea transportation. Goods will arrive in 10~45 days, according to the diatance.

Function introduction of the control part:
* Temperature control
* Time control
* Automatic demagnetization
* Power adjustment
* To display the target temperature value of heating and the final actual temperature of heating
* To display the current heating temperature and left time of heating
* Warning tone for being over of heating
* Firm and reliable industrial design
* Heavy structure capable of enduring severe environment of the workshop
* Dust-proofing, water-proofing and oil resisting keyboards
* No damage to the bearing
* No impact on the lubrication of the bearing
* The shockproof base can prevent against any shock mark on the bearing caused by the environmental vibration during the heating

Easy operation
* The integrity control is visible.
* Design of convenient rotating heating rod or traveling car

Micro-electronics processor control
* Design for easy maintenance
* Self-diagnostic program

High efficient, energy-saving and environmentally-friendly product
* Quick heating, high efficient and energy saving
* Clean: no oil fume or oil vapor or wastes to be dealt with
* Safe, clean and environmentally-friendly

Traditional methods, such as flame, oil bath and eclectic furnace, are not only expensive, they produce fumes, terrible smell and waste oil as well. The induction heater replaces the traditional methods to create a safe and clean working environment.

* Quick, but no damage
After heating, the bearing will expand outward in the direction of cylinder, which can avoid the damage caused by assembly. The induction heating is a perfect heating mode which needs no pre-heating. It may take several seconds or several minutes to have the bearing heated to 120ºC, which depends on the weight of the bearing. No damage will be caused to the advance lubrication.

* Rational design
To meet the requirements of the industrial environment, the design concept of X-30 Series induction heaters is practicality, reliability, convenience and durability.

Operation procedures:
1. Switch on as required, and then the main engine will check the probe and the ambient temperature automatically and display the ambient temperature as well.
2. Press the function button to choose temperature control or time control. If it is necessary to adjust the temperature or the time, press the button of "up" or "down" to choose the proper parameter. When the temperature control is chosen, attach the magnetic probe to the outside of the bearing inner race. The highest temperature of the bearing can't be over 120ºC
3. Press the button of "start". Then the main engine starts to heat the workpieces. When the set time of heating is over, the main engine will stop heating automatically and
demagnetize. In the case of temperature control is adopted, the temperature of workpieces will remain constant when it comes to the set value. When assembling, press the button of "stop".
4. The assembly can be implemented as soon as the workpieces are taken down
5. When heating the same kind of workpieces, please use the time control method and please record the time needed for heating last time automatically.Notes:
1. This bearing heater can check the probe automatically in the case of temperature control. So the heater can't be started without a probe;
2. It is strictly prohibited to start the heater without installing the yoke;
3. It is advisable to use the well matched yoke when heating the workpieces in order to improve the work efficiency;
4. The highest temperature of the bearing can't be over 120ºC.
5. Please wear the heat resisting asbestos gloves when taking down the workpieces in order to prevent against burn.
6. Please do not leave the probe on the workpiece for a long time in case of shortening the service life of the probe.

Control Method and Display for Users
-Temperature Control
-Time Control
-Automatic Demagnetization
-Power Adjustment
-Show the heating temperature and heating the final target temperature actual value
-Display the current heating temperature and heating time remaining
-Prompt for the End of Heating
Compact Portable
-Vehicles Equipped with Devices Customize
Operate Easily
- Straightforward Control
-Facilitated rotating heating , a Solid Industrial Design

A Solid Industrial Design
-Heavy structure of the workshop by the stand the harsh environment
- Dust-proof, waterproof, anti-oil-function keyboard
Not detract from bearing
-Do not affect the bearing lubrication
-There are shock heating of the base to prevent vibration due to environmental reasons bearing on the marks left by David
Microelectronic Processor Control
-Designed to facilitate maintenance
-With self-diagnostic procedures
Laudable and environmentally friendly products
-Rapid heating, high efficiency and energy saving
-Clean: a smoke-free, non-steam, no waste disposal

Q1: How can contact sales ?
A1: Please call: 0086 21 685 61366 for pre-sales or click the contact find our website and email address.

Q2: How can I buy SOV products in my country?
A2: Please send us an inquiry or email , we will reply to your if there is distributor in your country.

Q3: Can I have SOV products catalog and price list ?
A3: Please visit our English website:www.sovhydraulic.com to download our E-catalog, and send us an email for price list

Q4: How long does it take to get the product If I place an order?
A4: If products stock available, after confirmation of your payment or advance payment , we will pack and deliver in 3-7 days. If you select international parcel service, it can be arrived in 3-7 days. If it is by sea shipment, it will take 15-45 days depending on different locations

Q5: How to make payment ?
A5: First send us an inquiry, and we will reply you quotation, if our price suits you, we will prepare proforma invoice with our banking details.

Q6: Manufacturing time?
A6: Please send us an inquiry for stock condition, if we don’t have stock, and it is our standard products (refer to our model), it can be produced in 10-20 days. If it is customized, not our standard products, it will take 20-45 days to produce.