Features:
Product Name: 401
Specification: 20 g
Color: clear colorless
Type: ethyl
Viscosity (mPa/s) : 90/140
Curing speed: 5 seconds initial fixation 24 hours full fixation
Shear strength: 18/26
Relative density: 1.1
Applicable to: metal, plastic, elastomer, paper, leather, wood, glass, aluminum alloy
General purpose: medium viscosity, surface insensitive for bonding porous, acidic materials
Product Name: 403
Specification: 20g
Color: clear, colorless to light yellow
Type: alkoxyethyl
Viscosity (mPa/s) : 1100/1650
Curing speed: 5 seconds initial fixation 24 hours full fixation
Shear strength: 14/22
Relative density: 1.1
Application: metal, plastic, artificial rubber, low odor, low whitening, high viscosity moisture resistance, no need for complex
ventilation system
-Loctite 510
Packing specification: 50ml/300ml
Color: pink
Viscosity: 40000/140000 m pa.s
Maximum filling gap: <0.25mm
Temperature range: -55~+200 degrees
Curing speed: 25 minutes/72 hours
Relative density: 1.1
Typical use: 510 is a medium-strength, anaerobic sealant with excellent heat resistance. This product has excellent fluid
resistance, high temperature resistance, and rigid adhesive layer. It is used for flange parts with tightly matched rigid
structures, especially suitable For environments with high temperature and chemical resistance requirements.
-Loctite 515
Product specifications: 50ml/300ml
Appearance color: dark purple
Viscosity: 275000mPa.s
Gap filling: <0.25mm
Curing speed: medium curing speed
Temperature resistance: -55 ~ + 150 degrees
Application: Usually used as in-situ gaskets for pumps, thermostats, compressors, gearboxes and safety locks, it is more suitable
for rigid metal flanges, medium curing speed, thixotropy.
-Loctite 518
Packing specification: 50ml/300ml
Color: fluorescent red
Viscosity: 500000/1000000 m pa.s
Maximum filling gap: <0.25mm
Temperature range: -50~+150 degrees
Curing speed: 25 minutes/24 hours
Relative density: 1.13
Typical use: 518 is a general-purpose, flexible, excellent fluid resistance, non-corrosive, medium-strength thixotropic anaerobic
sealant with fast curing properties. It can form a flexible, solvent-resistant sealing layer. Will tear or age, can be applied to
flexible metal assembly including aluminum surface, easy to disassemble and clean. It is especially suitable for on-site forming
gasket glue on rigid flange surfaces of gearboxes and engine shells.
Henkel Loctite 574 flat sealant
Product specifications: 250ml
Appearance color: orange paste
Chemical type: methacrylic acid
Maximum filling: 0.51mm
Viscosity: 23000-35000 MPa. s
Shear strength: 8.5N/mm2
Fluorescence: Yes
Curing speed: 45 minutes for initial curing, 24 hours for full curing (aluminum)
Temperature resistance: -55℃-150℃
Typical use: suitable for machining, rigid metal flanges, general purpose
English
